Pachislo Coin Jam Prevention & Options
Sq. Plastic Brown or Black Coin Mechanism
1. Flip machine off.
2. Take away the underside coin protect. In some instances the sq. brown coin mechanisms have coin shields which can be hinged – simply decrease the coin protect. The black variations have detachable coin shields slot online
. Press in on the left and proper to take away.
3. The coin path is roofed by a spring loaded space. Look carefully and you may simply see the spring within the picture. Pull the spring loaded space up – it really strikes up and to the higher proper.
4. Clear the coin along with your finger.
If the coin is caught within the acceptor on the entrance of the machine and you may see it, attempt pulling out of the entrance. Whether it is lodged the place you both can’t see it or can’t take away it, pull open the spring loaded space and put in one other token and push it UP to push dislodge the coin and pull it up by way of the entrance. Flip the machine again on and reset if wanted.
The longer metallic variations work the identical means and also will have a spring loaded entrance.
Stopping Coin Jams
Most coin jams usually are not the results of issues along with your machine however of tokens and filth.
Virtually all Pachislos settle for .984″ tokens solely. Though your tokens might seem like the identical dimension, a slight variation in size or width could also be sufficient to trigger coin jams.
Coin mechanisms can turn into VERY soiled over time. This induced the tokens to maneuver very slowly by way of the coin path and turn into caught within the coin mechanism or the coin chute and by no means fall into the hopper. Observe these steps to forestall future coin jams:
1. Verify for Magnetic Tokens
Earlier than you utilize tokens in your machine run a magnet over them and take away any magnetic tokens. Fairly a couple of machines will kick out or jam magnetic tokens and THEN ship an error code.
2. Verify Token Sizes
Most Pashiclos solely settle for .984″ tokens. Your whole tokens might seem like an identical is dimension, however your machine could also be selective. Something aside from.984″ will turn into jammed. Put the tokens in small stacks and see if any are barely bigger or thicker than the others and take away them.
3. Clear the Tokens
Use Kaboom cleaner. Combine just a little in a bucket of heat water. Drop your tokens in and blend them for a couple of minutes. Rinse them and dry them earlier than utilizing. If you happen to use your machine typically do that each six months or so to forestall filth buildup within the coin mechanism, coin path and hopper.
4. Clear the Mechanism
Eradicating the mechanism is straightforward. Unplug and take away it and clear it nicely with a moist wipe, lifting the spring loaded space and cleansing there as nicely. If the metallic coin path is rusting use a pointy knife, screwdriver or exacto knife to take away as a lot rust as potential and clear the rust with a wipe. When you’re accomplished give the trail a VERY SMALL squirt of silicone spray, wiping off any extra.
5. Clear the Coin Chute and the Coin Acceptor
Whereas the coin mechanism is out, clear the surface coin acceptor the place the cash enter the machine. You probably have moist wipes attempt utilizing a skinny knife to push a moist wipe gently into the coin acceptor from the surface of the machine and pulling it out the opposite aspect to scrub the within. When you’re glad spray one squirt of silicone spray into the coin acceptor, wiping off any extra silicone.